Stonite is a single layer cement and aggregate based tile used for indoor and outdoor floor covering and wall cladding, produced by vibro-compaction under vacuum.

Stonite utilizes vibro-compaction under vacuum technology to produce its products, which results in aggregate cement tiles with very minimal water ratio, very dense surface in comparison to classical terrazzo tiles, as well as much higher tensile and compression strength.

Stonite tiles are produced 400x400mm and 600x600mm with 4 sides finished and 1530x680mm slabs with unfinished sides.

All tile and slab products are thickness calibrated to their intended thicknesses. 400x400mm tiles can be produced between 15-18mm thickness, 600x600mm tiles can be produced between 20-30mm thickness and 1530x680mm slabs can be produced between 25-30mm thickness.

Beyond the standard sizes tiles and slabs can be cut to required sizes at the factory as well.

Sides of 400x400mm and 600x600mm tiles are calibrated and rectified on all four sides, with chamfered edges. 1530x680mm slabs are not finished, however, they can be cut to desired size with finished edges upon request at the factory.

Stonite products are cement, water and aggregate based. They are not combustible and safe in terms of fire. NFPA ratings are such:

In terms of Euroclass system for Fire Classification Stonite products meet:

ᴬ¹ᶠˡ (non-combustible material for floor covering) rating.

These make Stonite products safe to use at home or public areas, as well as staircases, especially fire escape stairs in tall buildings.

Stonite products are based on crushed stone aggregate first class Portland White Cement, water and some pigments for coloring. The aggregates are generally marble chips from our or external quarries. Also, granite, basalt, or quartz aggregate may also be used depending on the product.

Besides the natural colors and patterns and sizes of different stone aggregates, Stonite products utilize various premium pigments for colors.

Besidest he standard rectified edges with chamfered profile, various edge profiles can be requested:

Stonite products can have surface finishes depending on the needs and likings:

• Polished

• Honed or Matte

• Antiqued

• Bush hammered or Sand Blasted